Tag: mechanical interview faqs
Mechanical Interview FAQs
Q.1) Which among the NC operations given below are continuous path operations?
Arc Welding (AW) Milling (M)
Drilling (D) Punching is Sheet Metal (P)
Laser Cutting of...
Difference Between Planer and Shaper Machine
Following are the Differences Between Planer and Shaper Machine
Brass – Alloys and Uses
Alloying Elements in Brass and Uses
All brasses are basically alloys of copper and zinc. There are two main type of brass.
(i) Alpha brass (upto...
Stress- Strain Diagram
Stress Strain Diagram is very important diagram to understand the concepts of mechanical engineering. It depicts the variations of strain alongside stress and the...
Lathe Machine Parts
The main parts of a Lathe Machine are :
- Headstock
- Tailstock
- Carriage
- Cross-slide
- Compound slide
- Bed
- Quick change gearbox
- Legs
- Feed shaft
- Lead screw
The...
Mechanical Interview Questions
Mechanical Interview Questions for Diploma/Degree
Q.1 > Euler's formula is valid for?
Ans. Long Columns
Q.2> For thick walled shell, dia-thickness ratio is?
Ans. less than 20
Q.3> Monel...
Commonly used fits for shafts
Commonly used fits for shafts
There are three types of fits :
Interference fit
Clearance fit
Transition fit
These fits are applied differently as per...
Geometric tolerance
Geometric Tolerance control frame and Commonly used Symbols
The picture shows Geometric Tolerance control frame used in Engineering drawing/Drafting Auto Cad. It also shows commonly...
